Need help?Do you have a question about the Lumag RAMBO-HC10 and is the answer not in the manual?
General| Engine Power | 9.5 HP |
|---|---|
| Fuel Type | Petrol |
| Engine Power (kW) | 7.0 kW |
| Starting System | Recoil start |
| Engine Power (HP) | 9.5 HP |
| Engine Type | 4-stroke |
| Engine Displacement | 420 cc |
| Blades | 2 blades |
| Fuel Tank Capacity | 6.5 liters |
Indicates a hazardous situation that could result in death or serious injury if not avoided.
Indicates a hazardous situation that could result in minor or moderate injury if not avoided.
Provides important information for proper machine use; failure to follow may cause damage.
Company reserves the right to change products; manual details are effective at printing.
Identifies and explains various safety labels and icons present on the unit for safe operation.
Ensures emergency stop is connected and emphasizes operator safety precautions.
Ensures machine is positioned correctly, guards are fitted, blades are sharp, and fasteners are tight.
Guidelines for feeding material, maintaining discipline, and avoiding hazards during operation.
Recommends wearing safety goggles, gloves, and appropriate footwear for user protection.
Precautions for children/pets and safe handling of gasoline-powered machines.
Engine safety guidelines, keeping combustibles away, and general safe operating procedures.
Exercise caution, check for damage, know stopping procedure, and maintain equipment.
Use in daylight, stay alert, keep fasteners tight, and use common sense for safety.
Operator must use common sense and contact dealers for assistance.
Details engine, capacity, dimensions, weight, and other technical data of the wood chipper.
Read safety rules, wear PPE, stand in safe area, and follow engine starting procedures.
Instructions for stopping, safe chipping practices, and handling machine blockages.
Stop engine, wait for cooling, disconnect spark plug wire/battery before any maintenance.
Information on bearing lubrication and recommendation for greasing the rack and pinion.
Table listing common engine symptoms like no start, low power, smoking, and their causes.
Addresses issues with operator lever engagement and loss of chipping power, suggesting adjustments.
Diagram showing wood chipper components with a list of part numbers and descriptions.
To Next Page
