General Safety Information
1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2. Review the diagrams thoroughly before beginning. All electrical connections must be in
accordance with local codes, ordinance, and the National Electric Code. The fixture
should be installed by a qualified licensed electrician.
3. Before starting the installation, disconnect the power by turning off the circuit breaker or
by removing the appropriate fuse at the fuse box. Turning the power off using the light
switch is not sufficient to prevent electrical shock.
4. Equipment should be mounted in location and at heights where it will not readily be subject
to tampering by unauthorized personnel.
5. Do not use this equipment for other than intended use.
6. All servicing should be performed by qualified personnel only.
To Next Page
Loading...