Lumary Smart RGB String Light - Page 24

Buton Functions:
1. Long press 5s to enter the network conguration mode. There's a
detailed network conguration tutorial on page 3.
2. Tap the button, the mode is dierent each time, and the default modes
in below:
-1 Turn on
-2 Static monochromatic mode: red, green, blue
-3 Dynamic mode: breathing, ow, chase, dazzle
-4 Turn o
(Note: Long press for 5s in any mode will enter the network
conguration state)
1.Plug and play.
2.Just insert the adapter into an appropriate power socket to turn on the
string light and
unplug it to turn o the light ,no need to install bulbs.
23