Lumary Smart - Connect using Easy Mode; Step 2: Select EZ Mode; Step 3: Confirm Rapid Flashing Light; Step 4: Enter Wi-Fi Credentials

NOTE: Lumary can’t connect to 5GHz networks.
*If the connection fails, try to connect using AP Mode.
3 Connect: Easy Mode
STEP 1
Choose “Light Source(BLE+Wi-Fi)”.
Select upper right corner “EZ Mode’’
STEP 2
STEP 4
Enter your Wi-Fi network and
password.
STEP 5
The Lumary App will
connect to your devices.
******
STEP 3
Make sure light is rapidly
ɥDVKLQJZKLWH
If not, reset to reach Easy Mode
to connect.
Press “Next ” in the App.
Open the Lumary App. In the top
corner of the Devices screen, click (+).