Lumary Smart - Connect using AP Mode; Step 2: Confirm Slow Flashing Light; Step 4: Connect to Hotspot; Step 5: Connection Confirmation

20 pages

To Next Page

To Previous Page

STEP 5

The Lumary App will connect to

your devices .

NOTE: Lumary can’t connect to 5GHz networks.

*If the connection fails, try to connect using AP Mode.

4 Connect: AP Mode

STEP 1

Make sure light is

VORZO\ɥDVKLQJZKLWH

If not, reset to reach

AP mode.

STEP 2

Open the Lumary App. In the top

corner of the Devices screen, click (+).

STEP 3

Press “Next” and enter

your Wi-Fi details.

Choose “Light Source(BLE+Wi-Fi)”.

Select upper right corner “AP Mode’’

******

Follow the instructions to choose

the device from your Wi-Fi list.

STEP 4