Lumex AQ1000 - MAINTENANCE; Cleaning Procedures; General Maintenance Checks

12 AQ1000-INS-LAB-RevD13
MAINTENANCE
CLEANING
Perform the following cleaning procedures before use and
as necessary thereafter.
Pump
Wipe the pump with a clean, damp cloth and mild
detergent, and keep it away from dust. Air dry.
s NOTICE:Donotusephenolicproductsorcorrosiveor
powderedcleanserstocleanthepump.
s NOTICE:Donotimmerseorsoakthepump.
Bubble pad
Wipe the bubble pad with a clean, damp cloth and mild
detergent. The bubble pad may also be cleaned using a
10% solution of sodium hypochlorite (bleach) diluted in
water. Air dry all parts thoroughly before use.
s NOTICE:Donotusephenolicproductstocleanthe
bubblepad.
s NOTICE:Aftercleaning,airdrythebubblepadwithout
directexposuretosunlight.
GENERAL MAINTENANCE
1. Check main power cord for abrasion or excessive wear.
2. Check bubble pad for signs of wear or damage. Ensure
air tubes are rmly secured to bubble pad and pump
connectors.
3. Check the air tubes for kinks or breaks. For
replacement, please contact your Graham-Field
authorized distributor.