To Next PageTo Next Page
Need help?Do you have a question about the Lumi-O spa-O and is the answer not in the manual?
Critical safety warnings and precautions to prevent injury and drowning.
Guidelines for choosing a safe and level location for outdoor spa installation.
Requirements for indoor spa placement, including ventilation and door access.
Details on GFCI protection, dedicated circuits, and wiring standards.
Information on converting the spa heater from 120V to 240V.
Step-by-step guide for filling the spa with water before operation.
Procedures for connecting power, priming the pump, and initial spa activation.
How to adjust hydrotherapy jets and air controls for optimal performance.
Importance of clean suction fittings and skimmer maintenance.
How to adjust temperature and operate spa jets.
How to control LED lighting and select different spa modes.
Understanding filter cycles and freeze protection features.
Explains error codes and required actions for spa troubleshooting.
Guidance on maintaining water balance, sanitization, and general care.
Detailed steps for draining, clearing lines, and preparing the pump for winter.
List of spa components that need to be stored indoors during winter.
Guidance on storing the filter system and heater during winter.
Recommendations for covering and supporting the spa during winter.
Answers to common questions regarding spa operation and maintenance.
General advice for resolving common spa operational issues.
Troubleshooting steps for components not operating or poor jet action.
Addressing issues like water too hot or leaks from jets.
Details on shell, electrical, and plumbing warranties.
Information on acts voiding warranty, disclaimers, and service calls.
Steps for correctly positioning and securing the spa cover.
Recommendations for cleaning and caring for the spa cover.
General