Safety – protection from electric shock
If the product is damaged please contact us before use.
Do not use Bodyclock Active if the lamp cover is broken, damaged or missing.
If you need to remove the lamp cover, unplug the unit first and let it cool down.
The lamp cover gets warm when the light is on, so keep
the unit clear of anything that may be damaged by heat.
Do not open the base – there are no user-serviceable parts inside.
For indoor use only.
Keep away from water and damp.
Keep the cable away from heated surfaces. If the cable is damaged it must be
replaced by Lumie, a Lumie distributor or suitably qualified person in order to
avoid a hazard.
Not to be used by or on individuals who are unconscious, anaesthetised or
incapacitated e.g. under the influence of alcohol.
Electromagnetic compatibility
This product conforms to the electromagnetic compatibility standard for medical
devices and is unlikely to cause interference affecting other electrical and
electronic products in its vicinity. However, radio transmitting equipment, mobile
phones and other electrical/electronic equipment can interfere with this product;
if this happens simply move the product away from the source of interference.
In rare cases where product function is lost due to EMC effects, disconnect the
product from power source for 5 seconds and then restart. If the problem persists,
please contact support. For further detailed information on the electromagnetic
environment in which the device can be operated refer to the website: www.lumie.
com/pages/e-m-c.
To Next Page
Loading...
