6. RESET
When the device is powered up by default it shows the status screen with
the status of the first 4 ports. In order to reset the device please follow the
following steps:
Press the jog wheel once to enter the ‘Main menu’.
Scroll down till you see the ‘Toolbox’ (5th option from the top).
Press the jog wheel once to enter the toolbox.
Scroll down until you see ‘Reset’.
Press the jog wheel once to enter the reset menu.
A pop-up window opens giving you the option to ‘Preserve IP settings’
and ‘Preserve user profiles’.
Choose which option you want by using the jog wheel to scroll between
the two options and press the jog wheel to confirm.
At the bottom of the pop-up window you have the option to ‘Reset’
or ‘Cancel’.
If you choose ‘Cancel’ you get a confirmation message that the reset
has been cancelled.
If you choose ‘Reset’ you get a new screen asking to confirm the reset
command. Once ‘Yes’ is selected the node will reset.
To Next Page
Loading...
Need help?
General
