Need help?Do you have a question about the Luminex LumiNode Series and is the answer not in the manual?
General| Category | Media Converter |
|---|---|
| Series | LumiNode |
| Mounting | Rack, Truss, Wall (depending on model) |
| Power | PoE or External PSU (depending on model) |
| Interface | Ethernet, DMX/RDM, Fiber (depending on model) |
| Fiber Type | Single-mode or Multi-mode (depending on model) |
| Operating Temperature | 0°C to +50°C |
| Storage Temperature | -20°C to +70°C |
| Humidity | 5% to 95% (non-condensing) |
Details various options for physically securing the LumiNode device in different environments.
Explains the methods for powering on LumiNode devices, including USB, PoE, and AC power.
Covers connecting the LumiNode to networks via Ethernet and to a computer via USB.
Lists and explains the status and function of various LEDs on the LumiNode for diagnostics.
Guides users on how to access and connect to the LumiNode's web interface for configuration.
Provides instructions on how to perform a factory reset on the LumiNode, with options to preserve settings.
Introduces the LumiNode's web interface, detailing its layout and key elements for configuration.
Configures external control sources, defining protocol, universe, and IP address for system integration.
Allows setting the network IP address, subnet mask, and default gateway for the LumiNode.
Configures device-specific parameters like short/long names and ID numbers for network identification.
Sets up contact closure inputs/outputs for triggering events or integrating with external systems.
Explains the concept of a "Process Engine" as a core processing unit within the LumiNode.
To Next Page
