21
6. LUMINODE IN DETAIL
The LumiNode series is a new range of network converter, inher-
iting more than a decade of experience from the Luminex Ether-
net-DMX converter design and manufacturing.
In the past, most of the people were designing their system ac-
cording to the number of universes and DMX ports they would
need on their lighting control system.
But today, with the ever-increasing number of lighting-controlled
devices fitted with an Ethernet port, there is a need for more pro-
cessing power and data handling flexibility. This is where the Lu-
minode series steps in.
Instead of assigning universes to a port, the user can now select
any incoming data, handle it the way they need, and send it back
to the network, or to a DMX port. All the data handling will be
powered by process engines.
6.1 What is a Process engine?
A Process engine can be seen as an entity within the LumiNode
firmware, accepting up to four sources, and who is able to send
it up to three different destinations. Additionally, remote interac-
tion and control can be applied to the process engine, via specific
control channels.
INPUT, choose from:
DMX port
ArtNet
sACN
RTTrPL
Internal
Play
REMOTE CONTROL, choose from:
Backup
Xfade
Switch
Master / Limit
Play
INPUT, choose from:
DMX port
ArtNet
sACN
RTTrPL
Internal
Play
INPUT, choose from:
DMX port
ArtNet
sACN
RTTrPL
Internal
Play
INPUT, choose from:
DMX port
ArtNet
sACN
RTTrPL
Internal
Play
OUTPUT, choose from:
DMX port
ArtNet
sACN
OUTPUT, choose from:
DMX port
ArtNet
sACN
OUTPUT, choose from:
DMX port
ArtNet
sACN
INPUT OUTPUT
PROCESSING
ENGINE
The LumiNode series oer the
following number of Process engines:
LumiNode 1: 2 x Process engine
LumiNode 2: 4 x Process engine
LumiNode 4: 6 x Process engine
LumiNode 12: 16 x Process engine
The LumiNode series oer the following number of Process engines:
LumiNode 1: 2 x Process engine
LumiNode 2: 4 x Process engine
LumiNode 4: 6 x Process engine
LumiNode 12: 16 x Process engine
To Next Page
Loading...
