Miscellaneous
LCD auto-o (sec) allows you to set the LumiNode to
automatically switch off the LCD after the set time. By default,
this is set to 600 sec. If the value is set to zero, the display will
always stay ON.
LCD pin allows you to set a PIN to lock changing
settings via the LCD screen. Click on the slider to
enable the LCD pin.
Web auth, for security reasons, a password can be
enabled on the LumiNode web interface. Click on the
slider to enable web authentication, and type in your
password.
Led slider allows you to change the brightness of the LEDs
on the LumiNode.
Press “Save” to apply your settings.
17
3 | GLOBAL SETTINGS
To Next Page
Loading...
