Reset
In this panel, you can reset the LumiNode, with two separate op-
tions:
Preserve IP address, all settings get restored to factory
default apart from the IP address set to reach the device.
Custom profiles are all deleted and modified default profiles
are restored to default.
Preserve proles, during the reset the custom stored profiles
and modified default profiles are being kept.
Click on the “Reset” button to perform the selected reset.
Performing a reset with these two options disabled will bring the
LumiNode to its factory settings.
15
2 | CONFIGURATION / 2.1 WEB INTERFACE PRESENTATION / TOOLBOX PAGE / RESET
To Next Page
Loading...
