Lupe PURE CORDLESS - User Manual

Questions and Answers

M
mitchellkennethJul 28, 2025
How to fix a Lupe Vacuum Cleaner that does not power on?
- D
  Daniel HallJul 28, 2025
  If your Lupe Vacuum Cleaner won't turn on, it could be due to a few reasons. First, ensure the battery isn't flat or missing; charge it and correctly insert it, then try turning the power on. Another cause might be a blockage in the airway or blocked filters. If so, remove any obstructions, empty the bin, clean the shroud, and clean both the pre-motor and HEPA filters. Lastly, confirm the pre-motor filter is properly inserted before attempting to power it on.
C
Christina NovakAug 3, 2025
Why is my Lupe Vacuum Cleaner not picking up dirt?
- M
  Megan MartinAug 3, 2025
  If your Lupe Vacuum Cleaner isn't picking up dirt, it might be because the bin is full or the brush bar is clogged. Empty the bin and clean the shroud. Also, clean the roller and brush bar to remove any obstructions. Another possible reason is a blockage in the airway or blocked filters, so remove any blockages and clean the pre-motor and HEPA filters.
B
Brenda HarrellAug 8, 2025
What to do if Lupe Vacuum Cleaner turns off before the battery is empty?
- K
  Kylie DuncanAug 8, 2025
  If your Lupe Vacuum Cleaner turns off before the battery is empty, it could be due to a blockage in the airway or blocked filters. Try removing any blockages, empty the bin, and clean the shroud. Also, clean the pre-motor and HEPA filter. Another possibility is that the pre-motor filter has been removed. Re-insert the bin with pre-motor filter and try turning it on again.
T
Tammy NelsonAug 15, 2025
Why did the brush bar and roller stop working on my Lupe Vacuum Cleaner?
- R
  russokurtAug 15, 2025
  If the brush bar and roller on your Lupe Vacuum Cleaner stop working, here are a few things to check: 1. First, press the brush bar on/off button. If it flashes, lift the cleaner head off the surface and press the button again. 2. If it continues to flash, power off the vacuum, turn the twist caps, remove the brush bar and roller, and clear any blockages. 3. It's also possible that the power setting is too high for the type of floor you're cleaning. Try decreasing the power and see if that resolves the issue.
C
Christine MeyerAug 20, 2025
What to do if the battery lights stay on but the Lupe Vacuum Cleaner is off?
- D
  Denise JohnsonAug 21, 2025
  If the battery lights stay on but the Lupe Vacuum Cleaner is off, it might be because the vacuum cleaner was not turned off before charging. Press the off button to turn the battery lights off. Always press the off button when the battery is flat before charging the battery. Another reason could be that the pre-motor filter is missing. Check that the pre-motor filter is inserted correctly and press the power button to turn it on.