Need help?Do you have a question about the Lupine BLIKA and is the answer not in the manual?
General| Water Resistance | IP68 |
|---|---|
| Bluetooth | Yes |
| LED Type | Cree XM-L2 |
| Weight | 85 g |
| LED | Cree XM-L2 |
Details power output (W, Im) and corresponding runtimes for different models.
Specifies unit weights, battery capacity, voltage, and charging times.
Defines beam angles, operating temperature range, and IP protection rating.
Advises against direct eye exposure and recommends training for public use.
Covers heat generation, stationary use dimming, and battery disconnection.
Explains the IP68 rating but clarifies it's not for underwater use.
Explains how the lamp initializes and indicates battery voltage via LEDs.
Details how to operate the lamphead using its buttons and dim levels.
Describes the meaning of blue, green, and red LED lighting on the switch.
Explains specific LED flashing patterns and battery warnings.
Presents a table of light output levels and corresponding runtimes.
Guides on how to select operating modes by holding the button.
Explains how to adjust the brightness of lower button LEDs in 5 steps.
Details how to attach the lamp to a helmet using the velcro strap.
Explains how to attach the lamp to the headband mount.
Describes how to mount batteries using velcro straps or click systems.
Explains the audible and visible indicators for battery charge level.
Describes the ultra-flat mounting plate for helmets.
Explains how the battery can be used as a power bank for devices.
Mentions the option to mount the lamp using standard GoPro mounts.
Details how to charge batteries using a USB charger and various power sources.
Covers cleaning, storage advice, and the battery charging process.
Lists common problems with lights and batteries and their solutions.
Recaps light output, runtimes, weight, charging, and operating conditions.
Covers country-specific usage laws and product modification notices.
Details the 24-month warranty, exclusions, and conditions.
To Next Page
