Need help?Do you have a question about the Lupo Dayled Series and is the answer not in the manual?
General| Type | LED Fresnel |
|---|---|
| CRI | >95 |
| TLCI | >95 |
| Input Voltage | 100-240V AC |
| Frequency | 50/60 Hz |
| Material | Aluminum |
| IP Rating | IP20 |
| Dimming | 0-100% |
| Control | DMX |
| Lifespan | 50000 hours |
Covers hot parts, overheating, and proper usage warnings.
Covers environmental disposal and safe hanging procedures with safety cables.
Guidelines for regular visual and electrical safety inspections.
Details of the product warranty period, conditions, and repair process.
Covers indoor use, IP20 rating, max temperature, and power supply requirements.
Information on LED array power for Dayled 650, 1000, and 2000 models.
Diagram and labels for Dayled 2000 connection and control points.
Diagram and labels for Dayled 1000 connection and control points.
Diagram and labels for Dayled 650 connection and control points.
Visual guide to the control panel for Dayled 2000 and Dayled 650/1000 models.
Details on manual operation, including dimmer, color adjustment, and reset device.
Instructions for DMX addressing, on/off control, and device reset.
Guide to accessing and navigating advanced settings via the MODE button.
Configuration for CCT/Monocolor modes, effect mode, dimmer, and frequency.
Settings for DMX resolution (8bit/16bit) and behavior on signal loss.
Adjustments for display timeout, filter speed, and linearization curves.
Contact details for Lupo support and inquiries.
Information on V-Mount battery power supply kits for Dayled models.
Details on channel usage for Dimmer and Color Temperature in 8-bit mode.
Details on channel usage for Dimmer and Color Temperature in 16-bit mode.
To Next Page