Insert bulbs (not included). Use 60-watt max. E12
incandescent bulbs.
4
2.
3. Replace the cover (A) on the fixture (B) with the previously
removed screws.
4. Pass the wire through the top pole (C), and then turn
the top pole counterclockwise into the fixture (B).
ASSEMBLY INSTRUCTIONS
1. Remove the preassembled screws with a Phillips
screwdriver (not included) to detach the cover (A)
from the fixture (B).
B
A
B
A
C
B
Note: CFLs and LEDs are recommended for this item.
To Next Page
Loading...