Lutron Electronics Caseta PD-5ANS - Page 45

45
by Lutron
Total Dimmable LED Wattage Incandescent/Halogen Total Wattage
0 W + 600 W 500 W 400 W
1 W – 25 W + 500 W 400 W 300 W
26 W – 50 W + 400 W 300 W 200 W
51 W – 75 W + 300 W 200 W 100 W
76 W – 100 W + 200 W 100 W 50 W
101 W – 125 W + 100 W 50 W 0 W
126 W – 150 W + 0 W 0 W 0 W
B
B B
C
B
A
8
Connect the new Caséta Diva Smart dimmer
Tagged Wire
Note wire color
tied to blue wire
Ground
(Green Wire)
9
Mount the Caséta Diva Smart dimmer
10
Attach the wallplate
11
Remove existing toggle switch from wall at Location 2
3-Way Installation - Caséta Diva Smart Dimmer with Mechanical Toggle Switch (DVRF-6L)
12a
Modify wiring for existing toggle switch
Location 1
Location 2
Location 1
Red
Blue
Black
Location 1
A
B
C
Important note:
Ganging units together may reduce the dimmer’s maximum wattage
rating. See the chart below for maximum wattage information.
Ground - Green / Bare Copper
(keep connected to switch)
Different Color
Screw / Tagged Wire
(disconnect from switch)
Noted wire color
from Step 8
(keep connected to switch)
Location 2
Remaining Wire
(disconnect from switch)
7
Ganging and derating
Note: Diva Smart controls don’t have fins but derating is
still required. See the chart below.
‘snap’
Wallplate
Adapter
Wallplate