61
by Lutron
Multi-Location Installation - Caséta Wireless Dimmer with Pico Remote Controls (PD-6WCL) Multi-Location Installation - Caséta Wireless Dimmer with Pico Remote Controls (PD-6WCL)
21
Turn power on at circuit breaker
Pairing the dimmer and Pico remote controls
22
Press and hold "Off" button on dimmer
0
5
10
15
6
sec.
UNTIL
HOLD
Status LEDs flash
23
Press and hold "Off" button on remote control
0
5
10
15
6
sec.
UNTIL
Location 2
Location 1
Repeat steps 22 and 23 to pair remote control
at Location 3.
24
Repeat for remote control at Location 3
17
Tag and disconnect wires from the existing switch
Different Color Screw
Ground (Green / Bare Copper)
18
Connect the wires
19
Attach the wallplate bracket and Pico remote control
Ground (Green / Bare Copper)
Place tag - to
identify wire on
different color screw
Location 3
Tagged Wire
Location 3
Location 3
20
Attach the wallplate
‘snap’
Wallplate
Adapter
Wallplate
Location 3
HOLD
Lights flash
three times
3x
To Next Page
Loading...