To Next PageTo Next Page
Need help?Do you have a question about the Lutron Electronics DI-6300 and is the answer not in the manual?
General| Model | DI-6300 |
|---|---|
| Manufacturer | Lutron Electronics |
| Category | Test Equipment |
| Operating Humidity | Less than 80% RH |
| Sampling Time | 1 second |
| Power Supply | 9V battery (6F22) |
| Weight | 355 g (0.78 LB) (including battery) |
Details important warnings for safe operation, including risk of electric shock and measurement precautions.
Specifies optimal installation categories, pollution degree, altitude, and humidity for operation.
Highlights key capabilities and design aspects of the insulation tester.
Outlines display, measurement ranges, and overall device characteristics.
Details accuracy, resolution, and test voltage for various measurement ranges.
Describes the digital display unit showing measurement readings and status.
Explains the control for selecting measurement modes and ranges.
Details the switch for controlling power and locking measurements.
Identifies the button used to initiate measurement tests.
Shows the connection points for test leads.
Locates the access panel for the battery compartment.
Provides essential safety steps and checks before performing measurements.
Step-by-step guide for performing resistance measurements, including continuity.
Procedure for conducting insulation resistance tests with specific voltage ranges.
Instructions for measuring AC voltage using the instrument.
Guidance on using the power lock feature for continuous or manual measurements.
Factors affecting insulation resistance readings and interpretation.
