Lutron Electronics MTM-380SD User Manual

4. MEASURING PROCEDURE
1)Install the batteries into the battery compartment :
* Loose the " Screw of the battery cover " ( 3-9, Fig. 1 )
and take away the " Battery Cover " ( 3-8, Fig. 1 ) from
the meter.
* Replace with DC 1.5 V battery ( UM4/AAA, Alkaline/Heavy
duty type ) x 6 PCs, and reinstate the cover.
* Make sure the battery cover is secured after changing
the battery.
2)Insert the plug of " Temp. probe " ( For example the
included Temp. probe, TP-01 " into the " T1 Temp.
probe input socket " ( 3-10, Fig. 1 ).
If you have other Temp. probes, then plug its plug to
" T2 Temp. probe input socket " ( 3-11, Fig. 1 ) or
" T3 Temp. probe input socket " ( 3-12, Fig. 1 ).
Remark :
* If plug one Temp. probe to the meter, will show
the one channel ( T1 ) Temp. only.
* If plug two Temp. probes to the meter, will show
the two channels Temp. ( T1, T2 ).
* If plug three Temp. probes to the meter, will show
total three channels Temp. ( T1, T2, T3 ).
3)The " Display " ( 3-1, Fig. 1 ) will show the
temperature value ( T1, T2, T3 ) that sensing from Temp.
probe.
Remark :
*
The up Display value will present the T1 temperature value.
*
The middle Display value will present the T2 temperature value.
*
The low Display value will present the T3 temperature value.
5

Lutron Electronics MTM-380SD Specifications

General

Brand	Lutron Electronics
Model	MTM-380SD
Category	Data Loggers
Language	English