Installation Guide
Please Read
SELV / PELV / NEC® Class 2
24–36 V 30 mA
®
QS Wallstations
Contents
Overview ............................................. 2
Power Group Wiring Example.............................. 3
Wiring/Installation ...................................... 4
Mounting............................................. 7
Troubleshooting........................................ 8
Wallstation circuits are classified as SELV / PELV / NEC® Class 2 circuits. As Class
2 circuits, they comply with the requirements of NFPA
® 70, National Electrical
Code
® (NEC®). As SELV / PELV circuits, they comply with the requirements of IEC
60364-4-41, VDE 0100 Part 410, BS7671:1992, and other equivalent standards.
When installing and wiring to these wallstations, follow all applicable national and/
or local wiring regulations. External circuits connected to input, output, and other
communication terminals of wallstations must be supplied from a listed Class 2
source or comply with the requirements for SELV / PELV circuits, as applicable in
your country.
For Programming, see the QS Wallstation Programming
Guide (P/N 0301639) at www.lutron.com/qs
English
Español
Français
Português中文
Deutsch Italiano 日本語
To Next Page
Need help?
General
