33-00066EFS—03 27
Adjusting humidification settings
1 Touch MENU and select Humidification.
2 Select Auto.
3 Touch s or t to select humidity level.
4 Touch Done to save your settings. Touch
Cancel to ignore changes.
5 If frost or condensation appears on the
windows, touch MENU, then select Window
Protection. (Use a lower number to prevent
frost or condensation. Use a higher
number if indoor air is too dry.)
NOTE: Window (frost) Protection is
available only if an outdoor air sensor
is installed OR if using the outdoor
temperature from the WiFi connection
to get local outdoor temperature from the
Internet.
NOTE: The thermostat controls
humidification and dehumidification
as needed to maintain the desired
humidity level. Depending on how your
thermostat was installed, the thermostat
may maintain a 15% separation between
humidification and dehumidification
settings.
Humidification
Window Protection
Humidification
Off Auto
To Next Page
Loading...