Lutz MD1xL - 6 Maintenance and Servicing; 7 Repairs; 8 Disposal

13
en
0698-401 MD1xL / MD2xL - 08/2020
6. Maintenance and servicing
If the compressed air motor is missing the required power, check the following points:
Fault Cause Remedy
Airpressurenotsucient
(6bar/87psi)
• Compressed air line is leaky
• Pressure losses
• Seal or replace the compressed
air line
• Enlarge the cross-section of the
compressed air line
Airpressureuctuating • Compressed air line is leaky
•Compressedairline,mueror
airlterblocked
• Error during generation of
compressed air
• Seal or replace the compressed
air line
• Clean compressed air line,
muerorairlter
• Check air compressor
Airlteronmaintenanceunit
is dirty or blocked
• Impurities in compressed air •Cleaningtheairlter
Lack of oil in the compressed
air system
• Oiler impure or damaged • Clean, repair or replace oiler
Muerblocked • Impurities in compressed air
• Dust in the environment
•Cleanmuer
If none of the above defects is detected, the compressed air motor must be repaired.
7. Repairs
►RepairsshouldonlybemadebythemanufacturerorauthorizedLutzdealers.
►OnlyuseoriginalLutzPumpenspareparts.Ifothersparepartsareused,liabilityonthepartofLutz
Pumpen is obsolete.
8. Disposal
Dispose of the motor according to the locally applicable regulations.