Lutz ME II - Motor Functionality; Function Description; Transporting the Motor; Motor Storage Guidelines

11
0697-351 ME II - 10/2020
en
3.3 Function
The ME II motor forms a drum and container pump with an appropriate pump tube.
Theuseinhazardousareasorforpumpingammableliquidsisonlypermittedwithapumptubeof
category II 1/2 G, e.g:
• Lutzpumptubemadeofstainlesssteel(SS1.4571)
• LutzpumptubemadeofHastelloyC(HC)
4. Transport and storage
4.1 Transport
Unpacking and checking condition of delivery
► Unpack the motor on receipt and check for transport damages.
► Report transport damages to the manufacturer immediately.
► Check that the consignment is complete as ordered.
4.2 Storage
NOTICE
Damage of property as a result of incorrect storage!
►Store the motor properly.
►StorethemotorprotectedfromweatherinuencesandUVrays.
5. Installation/Assembly and connection
5.1 Assembly of pump tube and motor
3Motorisswitchedo
► Connect the motor with the pump tube.
► Turn the motor slightly to ensure that the driver engages in the coupling.
►Firmlyconnectthemotorandpumptubebymeansofthehandwheel(right-handthread)(→Fig.1).