Lutz ME II - Operator Duties and Responsibilities; Safe Working Practices; Personnel Qualification Requirements; Warranty and Personnel Maintenance Duties

8
0697-351 ME II - 10/2020
en
Duties of the operator
Safety-conscious working
• Operate the motor only in a technically sound state, for its proper use, and conscious of safety and
hazardstakingintoaccounttheseinstructions.
• Ensure observance and monitoring of:
- Proper use
- Statutory or other safety and accident prevention regulations
- Safetyprovisionsinhandlinghazardoussubstances
- Valid standards and guidelines in the respective country of operation
• Provide protective equipment.
Personnel qualication
• This device must not be used by children. It may be used by persons of reduced physical, sensory or
mental capacity or by persons lacking in experience or knowledge provided that they are supervised
orhavebeeninstructedinthesafeuseofthedeviceandunderstandtheassociatedhazards.Cleaning
or user maintenance must not be performed by children.
• Ensure that personnel tasked with work on the motor have read and understood these instructions and
all associated applicable documents, particularly safety, maintenance and servicing information, before
they start work.
• Clarify responsibilities, competencies and monitoring of the personnel.
• Ensurethatallworkiscarriedoutbytechnicalqualiedpersonnelonly:
- Assembly, servicing, maintenance work
- Work on the electrics
• Personnel to be trained must only work on the motor under the supervision of technical personnel.
• Personnel holding the motor in their hands during operation will be subjected to vibrations. The upper
limbs are exposed to an acceleration of less than 2.5 m/s².
Statutory warranty
• Duringtheguaranteeperiod,obtainthemanufacturer'spermissionformodications,maintenance
work or alterations.
• Use only original parts.
Duties of the personnel
• Observe the notices on the motor and maintain them in a legible state.
• Use protective equipment where necessary.
• Only perform work on the motor during downtime.
• Ensure that the device is disconnected from power supply before you carry out assembly and maintenance
work.
• Aftercompletingalltheworkonthedevice,remountthesafetydevicesinaccordancewithspecications.