LUVERNETRUCK.COM
•
PRODUCT SUPPORT: 877.287.8634
•
495154-INS-RA
•
05/18/2020
•
ECN6772
•
PAGE 2
Step 1
Place the Grip Step
™
XL running board on the
mounting brackets. Place the clamping bracket
inside the running board and secure with the
provided 5/16" hardware.
Repeat for the next two brackets.
Adjust the board so it is parallel with the
vehicle. Tighten all hardware to 10 ft-lbs.
Clamping bracket mounts
inside the running board
Mounting brackets shown
for representation only
To Previous Page
Loading...
