Welcome to your LUX/GEO quick-start guide
Your LUX/GEO internet connected thermostat puts the control of your comfort in your hands and you
are only 10 easy steps away from completion.
Step 1: Getting started
Included:
Items needed:
IF AT ANY TIME DURING THE INSTALLATION AND SET-UP PROCESS YOU NEED ADDITIONAL SUPPORT,
VISIT LUXGEO.COM OR CALL 856.234.8803
2-AA Lithium
batteries
2 mounting
screws
2 wall
anchors
wire stripper
& cutter
Phillips & at
head screwdriver
WiFi enabled
mobile device
IF YOU DO NOT HAVE AN iOS OR ANDROID DEVICE, PLEASE VISIT LUXGEO.COM OR CONTACT LUX SUPPORT
GEO
Download App and
Create Your Account
Download your LUX Products App
Depending on device type, search
the App store for “LUX Products” and
create your LUX user account
Lux
Power Bridge
WiFi
router
For Use On:
Most 24-volt heating and cooling systems
1 or 2 stage heat / 1 or 2 stage cool: gas, oil, or electric
furnace and a/c systems
1 or 2 stage heat / 1 stage cool: heat-pump style systems
2-wire hydronic (hot water) zone valves
Gas Millivolt wall / floor heaters
Not For Use On:
120/240 VAC line-
voltage systems
(without a transformer)
Heat pumps that have
(Y2) two compressor
stages
Locate and gather the following items for ease of installation
To Next Page
Need help?
General
