Why is my Lux Tools Paper Shredder vibrating?
If your Lux Tools Paper Shredder is vibrating or making unusual noises, check for loose or damaged parts. Also, inspect the feeder chute for shredded material and clean it if necessary. Other possible causes include the cut size of shredded material is not small enough (change the blades) or a loose, worn, or damaged drive belt (have it tensioned or replaced by a specialist).
Why is my Lux Tools Paper Shredder motor vibrating or making unusual noises?
If your Lux Tools Paper Shredder is vibrating or generating unusual noises, it could be due to loose or damaged parts. Inspect the device and look for any loose or damaged components. Another possible cause is shredded material in the feeder chute. If this is the case, clean the feeder chute. Also, the cut size of shredded material may not be small enough, consider changing the blades. Finally, a loose, worn, or damaged drive belt could be the culprit; have it tensioned or replaced by a specialist.
What to do if shredded material no longer comes out of the Lux Tools 115315 Paper Shredder ejection chute?
If shredded material is not coming out of the ejection chute of your Lux Tools Paper Shredder, or is only coming out very slowly, it could be that the ejection chute is blocked, so clean it. Alternatively, the motor revolutions may be too low; try warm starting.
General| Brand | Lux Tools |
|---|---|
| Model | 115315 |
| Category | Paper Shredder |
| Language | English |
Identifies the product as a petrol-powered shredder.
Covers proper product use, safety symbols, and general safety information.
Guidelines for workplace safety, preparation, and specific device precautions.
Labels and identifies all main parts of the shredder for user reference.
Instructions for unpacking components and assembling the shredder.
Procedures for checking motor oil level and filling the fuel tank.
Steps for starting, stopping, and safely operating the shredder's motor.
Guidance on how to shred material, including safety and operational tips.
Schedule and tasks for routine cleaning and maintenance of the shredder.
Specific procedures for changing blades and other unit upkeep.
Procedure for safely draining the motor oil.
Instructions for cleaning the air filter and replacing the spark plug.
Guidelines for safely storing and transporting the shredder.
Environmental guidelines for proper disposal of the shredder and its packaging.
Identifies common faults and provides remedies for operation problems.
Lists key technical data and specifications of the shredder.
Details on recommended fuels and lubricants to be used with the device.
To Next Page
