EasyManua.ls Logo

Lux Tools 481 940 User Manual

Lux Tools 481 940
104 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
481 940
DE Benzin-Heckenschere
IT Tagliasiepi a benzina
FR Taille-haies à essence
GB Petrol hedge trimmer
CZ Benzínové nůžky na dřeviny
SK Benzínové nožnice na živý plot
PL Nożyce do żywopłotu spalinowe
SI Bencinske škarje za živo mejo
HU Benzinmotoros sövényvágó
BA/HR
Benzinski rezač za živicu
RU Бензиновые садовые нож-
ницы
GR Βενζινοκίνητο ψαλίδι μπορ-
ντούρας
NL Heggenschaar op benzine
Heckenschere_Benzin_481940.book Seite 1 Mittwoch, 28. September 2016 10:47 10

Questions and Answers:

Lux Tools 481 940 Specifications

General IconGeneral
BrandLux Tools
Model481 940
CategoryTrimmer
LanguageEnglish

Summary

For Your Safety

General safety instructions

General safety instructions for operating the device safely and preventing harm.

Risks caused by vibrations

Information on potential injury from vibrations and how to reduce risks.

Concerning the use of fuels

Safety precautions for handling flammable and explosive fuels to prevent fire and explosion.

Your Appliance at a Glance

Unwrapping and commissioning

Instructions for unpacking the appliance and checking its completeness.

Filling with fuel

Detailed steps for safely filling the fuel tank with the correct fuel mixture.

Operation

Check before use!

Essential checks to perform on the appliance before starting operation for safety.

Starting the engine

Step-by-step guide for safely starting the hedge trimmer engine.

Cold starting

Procedure for starting the engine when it is cold.

Warm start

Procedure for starting the engine when it is warm.

Stopping the motor

Procedure for safely switching off the hedge trimmer's motor.

Cutting hedges

Techniques and safety advice for cutting hedges effectively.

Tips on hedge trimming

Advice and methods for achieving optimal hedge trimming results.

Cleaning and Maintenance

Overview of cleaning

An overview of routine cleaning and maintenance tasks.

Cleaning the machine

Instructions for removing dirt and cleaning the appliance.

Oiling the gears

Procedure for lubricating the gears and gearbox of the hedge trimmer.

Cleaning/replacing the air filter

Steps for cleaning or replacing the air filter to maintain engine performance.

Cleaning/replacing the spark plug

Instructions for cleaning or replacing the spark plug for proper engine ignition.

Storing and Transport

Storing

Advice on how to store the appliance properly.

Placing the appliance out of service for an extended period of time

Instructions for long-term storage, including fuel removal.

Transport

Guidelines for safely transporting the hedge trimmer.

Malfunctions and Troubleshooting

In the event of a malfunction...

Introduction to troubleshooting common issues and faults.

Disposal

Disposal of the appliance

Instructions on how to dispose of the hedge trimmer responsibly.

Disposing of fuels and lubricants

Proper methods for disposing of hazardous waste like fuels and oils.

Disposal of the packaging

Guidance on recycling the product's packaging materials.

Technical Data

Approved Fuels

Special fuels for 2-stroke-motors

Details on specific fuels and their mixing ratios for two-stroke motors.

Instructions for fuels

General advice and precautions regarding fuel usage and storage.

Fuels with ethanol mixtures (e. g. E10)

Information on using fuels containing ethanol and their effects.

Fuels with ethanol mixtures (e. g. E10) for 2-Stroke-Motor

Specific guidance for 2-stroke engines using ethanol-blended fuels.

Special fuels for 2-stroke motors

Additional information on special fuels for two-stroke engines.

Intended Use

Personal Safety Equipment

Warranty Information

Warranty Conditions

Details of the warranty conditions and coverage.

Warranty Exclusions

Exclusions and limitations of the product warranty.

Related product manuals