GB
28
Service
• Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of the
power tool is maintained.
Safety Warnings for Drills and Screwdrivers
• Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory or fastener may con-
tact hidden wiring. Cutting accessory and fas-
teners contacting a live wire may make exposed
metal parts of the power tool live and could give
the operator an electric shock.
Additional safety notes
• Prior to starting work, use appropriate tool to
determine whether there are any hidden sup-
ply lines are located on the area you are work-
ing in. If in doubt, ask the relevant supply ser-
vices. Contact with power lines may cause fire
and electrical shock. Damaging a gas pipe may
cause an explosion. Damaging a water pipe
leads to considerable property damage and may
cause electrical shock.
• Immediately switch off the power tool when it
becomes blocked. Be prepared for sudden
forces occurring which may cause kickback.
The insert tool blocks, for example, due to over-
loading or tilting.
• Hold the power tool firmly. When tightening
and undoing screws, high forces may occur for a
short time.
• Secure the work piece. Use tensioning equip-
ment or a vice to secure the work piece to help
prevent kickback or uncontrolled flying of the
work piece (e.g. when getting jammed in the work
piece).
• Never set the power tool down before the tool
has come to a completed standstill. The
rotating tool may come into contact with the sur-
face and cause you to loose control over the
power tool.
• Only batteries authorised by the manufac-
turer with the values listed on the type plate
of this power tool may be used. The use of a
different battery may cause a risk of injuries and
property damage as a result of an exploding bat-
tery.
• Keep your workplace clean. Mixed contamina-
tion by various materials is particularly danger-
ous. Light metal dust (e.g. aluminium) can ignite
or explode easily.
• Inform yourself about the materials to be pro-
cessed and any dusts and vapours that may
be generated. Do not breath in even small
amounts of the generated dusts and
vapours. When processing certain materials
(various metals, minerals or woods as well as
weather protecting paints) damaging/poisonous
dusts may be generated which can cause allergic
reactions or serious illness. Do not breathe these
dusts and vapours in and avoid all contact. Mate-
rials containing asbestos may only be processed
by specialists.
• Set the switch for right/left rotation to the cen-
tral position before carrying out any work on
the power tool (e.g. maintenance, changing a
tool) and during transportation of storage of
the item. Unintentional activation of the On/Off
switch may cause a risk of injury.
• First activate the power tool after it has been
placed on the screw. If the inserted tool is
already rotating when you attempt to position it, it
may slip.
• Do not leave tools, objects or cable laying
around in the vicinity of the device. If you
stumble, you may injure yourself on the power
tool.
• When working with the device make sure the
area is well lit. Bad vision can result in injuries
caused by the power tool.
• Only use drill and screwdriver bits authorised
by the manufacturer. The use of different drill
and screwdriver bits may cause a risk of injuries
and damages to the power tool. Make sure that
the drills and screwdriver bits are securely
installed before switching on the device.
• Prevent overheating of the device and the
work piece. Excess heat may damage the tool
and the device.
• Never use power tool near flammable materi-
als. Sparks may set fire to these materials.
• Keep the handles dry and free of grease.
Slippery handles can lead to accidents.
• Do not use accessories that have not been
designed and recommended by the manufac-
turer for this specific power tool. Just
because you are able to attach an accessory to
your power tool this does not guarantee that it is
safe to use.
• The permitted revolutions of the tool must be
at least as high as the highest revolutions
specified on the power tool. Accessories that
rotate faster than they are permitted to may break
and fly and thus cause injuries.
• Remember that moving parts may also be
located behind ventilation and venting slots.
• Symbols affixed to your unit may not be removed
or covered. Information on the unit that is no
longer legible must be replaced immediately.
Before putting the unit into operation, read
and observe the instructions for use.
Risk of damage to the eyes! Never look
directly into the LED.
Only re-charge the battery pack indoors.
Do not dispose of a battery pack with the
household waste!
Do not dispose of a battery pack in water!
Do not burn the battery pack!
To Next Page
Loading...