EasyManua.ls Logo

Lux Tools A-RM-2x20 - Accessories

Lux Tools A-RM-2x20
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
41
*) The specified values are emission values and do not necessarily
represent safe workplace values. Although there is a correlation
between emission and immission levels, this cannot be used to
infer whether additional safety measures are necessary or not.
Factors which affect the current immission levels at the work-
place, include the type of room, other sources of noise, e. g. the
number of machines operating and other processes taking place
in the vicinity. Permitted workplace values can differ from coun-
try to country. This information is designed to help the user to
better assess the dangers and risks. Determination of noise
emission values in accordance with EN 60335-1.
**) The specified vibration emission value was measured in accord-
ance with a normed test procedure and can be used in order to
compare one tool with another. The specified vibration emission
value can also be used for an introductory evaluation of the
exposure. The vibration emission value may fluctuate from the
specified value during actual use of the power tool. These fluc-
tuations will depend on the way in which the power tool is used.
Try to keep vibrations to a minimum. One method of reducing
the vibration load is, for example, limiting the length of time you
work with the tool. All parts of the operating cycle must be taken
into account for this purpose (for example, also including times
in which the power tool is switched off and times in which it is
switched on, but is running without load). Determination of vibra-
tion emission values in accordance with EN 60335-1 &
EN 60335-2-77.
Accessories
Accessories are available from your local
vendor.
Number of stages 5
Volume of collecting sack 35 l
Sound power level (L
WA
)* 91 dB(A)
(K = 2,4 dB(A))
Sound pressure level
(L
PA
)*
77,9 dB(A)
(K = 3 dB(A))
Vibration** 2,03 m/s²
(K = 1,5 m/s²)
Weight 14 kg
Battery charger
Rated voltage 230 V~, 50 Hz
Rated power 70 W
Charge voltage 20,9 V
Charge current 2,4 A
Protection class II
Battery pack
Battery pack type Li-Ion
Rated voltage 20 V
Capacity 2000 mAh
Charging time 60 min
Item
number
Accessory
196051 Battery pack 2 Ah
196052 Battery pack 4 Ah
196054 Battery charger
196055 Battery charger
196053 Battery set with charger
Item number 196074
Rasenmaeher_Akku_196074.book Seite 41 Donnerstag, 5. Dezember 2019 2:04 14

Table of Contents

Related product manuals