The LUX ES QUEEN 450 is a pedicure spa chair designed for professional use in salons, offering a combination of comfort, massage, and hydrotherapy features. It incorporates an Auto Fill System for convenient water management and adheres to strict safety and grounding guidelines.
Function Description:
The ES QUEEN 450 serves as a comprehensive pedicure station. It features a comfortable chair with backrest and massage functions, armrests, and a folding manicure tray for client convenience. The foot-spa component includes a glass bowl with 7-colors LED lighting, a jet system for whirlpool action, and an adjustable footrest. The integrated Auto Fill System automates the process of filling the pedicure bowl to a precise water level and temperature, enhancing efficiency and user experience. A hand-spray is also included for easy rinsing.
Important Technical Specifications:
- Model: ES QUEEN 450
- Electrical Service:
- 110V, 60Hz, 15 Amp, GFCI protected grounded circuit for each individual pedicure spa.
- Main circuit breaker: 25Amp (for a maximum of two units per electrical outlet).
- Spa Chair Rate: 120VAC, 60HZ, 10A.
- Cleanjet Motor: 1/10 hp, 120V, 1.2 AMP, 600HZ.
- Water Capacity (Auto Fill): 4.2 gallons.
- Water Temperature (Maximum): Never exceed 100 degrees Fahrenheit.
- Drain Pump (Optional): Can pump up to 7 ft high.
- Plumbing Connections:
- Hot & Cold Water Supply: 3/8" fittings (1½" fittings at the rear of the unit).
- Drain Connection: 3/4" fitting at the rear of the unit (for discharge pump) or standard gravity drain with P-Trap.
- Dimensions:
- Width: 31"
- Length: 55"
- Height: 59"
- Foot-spa clearance (wall): 20" - 24"
- Foot-spa clearance (between units): 60" (center to center)
Usage Features:
- Auto Fill System:
- Preparation: Ensure the pedicure bowl is empty and the water stopper is plugged.
- Power On: Touch the POWER button to activate the AutoFill System.
- Filling: Press the AUTO FILL button to automatically fill the bowl to 4.2 gallons. The system will automatically shut off, and the blue AUTO FILL button will blink and lock. The LED light and jet pump will turn on automatically.
- Temperature Adjustment: Use the temperature knob to adjust water temperature during filling.
- Adding More Water: Touch the FILL button to add water for 8 seconds at a time, preventing overflow. Touch again to manually stop.
- Jet Operation: Touch the JET button to turn the jet pump on and off.
- Power Off: Touch and hold the POWER button for 3 seconds to turn off the Auto Fill System. All button lights will turn off.
- Temporary Lock Mode: The system enters a temporary lock mode every 30 seconds (POWER button blinks). To unlock, touch and hold the POWER button for 3 seconds.
- Seat Operation:
- Armrests: Can be raised up/down for easy client access.
- Manicure Tray: Can be folded up/down.
- Backrest & Massage: Provides comfort and relaxation.
- Adjustable Footrest: Allows for customized client positioning.
- Whirlpool Function: Press the jet button to start the jet motor for whirlpool action. Press again to stop.
- Hand Spray: Pull the hand shower from its receptacle and depress the thumb control to activate water flow. Release to stop.
- Draining: Open the drain plug by turning the control knob.
- Water Mixing Valve: A single hot and cold mixing valve on the front of the spa allows for water flow initiation (by lifting the handle) and temperature adjustment. The clean jet motor must be fully submerged before operation.
Maintenance Features:
- Grounding: The unit must be connected to an outlet equipped with a ground-fault circuit interrupter (GFCI). If not present, an electrician must install one. Do not use a grounding adapter.
- Daily Shutdown: ALWAYS turn the main power OFF at the end of the day.
- Cleaning: The clean jet motor is magnetically driven and double-insulated, eliminating the need for bonding.
- Installation:
- The spa base should be securely anchored to the floor through the opening in the back of the base.
- Plumbing connections for hot and cold water supply and drain (gravity or discharge pump) are located at the rear of the unit.
- Backflow preventers are optional and not included unless ordered.
- A qualified licensed electrician must install the wiring according to local codes.
- Safety Precautions:
- Read and follow all instructions.
- Do not permit children to use the unit unsupervised.
- Avoid use by persons with open wounds, poor circulation, or heart conditions without physician consultation.
- Use only for its intended purpose; do not use unrecommended attachments.
- Do not operate with a damaged cord or plug. Contact service for repair.
- Never drop or insert objects into openings.
- Do not block jets during pedicure operation.
- Never bring electrical devices into or near the unit.
- Do not use foaming, sudsing, or mineral oil-based additives in the water.
- Save these instructions for future reference.
To Next Page
Need help?
General