FLOOR CLEANING
ASSEMBLING THE LUX sora
Connecting the electrical hose
Attach the electrical hose to the socket of the LUX
sora until it can be heard to click into place. Note
the electrical interface, since the electrical hose can
only be assembled in one position.
The hose is connected to the LUX sora by means
of a 360 degree joint. This joint allows easy
vacuuming around the vacuum cleaner.
To detach the electrical hose, press the two release
buttons and lift off the electrical hose.
Connecting the electrical tube
Insert the electrical tube into the handle socket until
it can be heard to click into place.
To detach the electrical tube, press the release
button on the handle and pull out the electrical tube.
Please note
The LUX sora can only be used with its electrical
hose, not with any hose of previous Lux models.
Connecting the floor nozzle
Insert the electrical tube into the joint nozzle of the
floor nozzle until it can be heard to click into place.
Both devices are now ready for operation.
To detach the floor nozzle, press the release button on
the electrical tube and pull it out.
To Next Page
Loading...