Need help?Do you have a question about the Luxair LA-60-1100 STD and is the answer not in the manual?
General| Brand | Luxair |
|---|---|
| Model | LA-60-1100 STD |
| Category | Ventilation Hood |
| Language | English |
Proper disposal methods for packaging materials and warnings about suffocation.
Guidelines for disposing of old appliances responsibly, avoiding environmental hazards.
Intended use and warranty limitations for domestic use.
Electrical safety requirements, installation, and maintenance by qualified personnel.
Precautions for children, including hot lamps and suffocation risk from packaging.
Minimum height requirements, ducting materials, and connection to chimneys/flues.
Risk of toxic fumes due to insufficient air for heating appliances.
Specifies minimum ducting size and maximum length for all Luxair cooker hoods.
Details minimum installation height for gas and electric hobs.
Warranty void if incorrect ducting size or old ducting is used.
Provides guidance on the maximum length to cut from chimney sections for wall-mounted hoods.
Recommends professional metal fabricators for cutting island hood chimney sections.
Details the 125mm ducting system design for cooker hoods and extraction fans.
States that 125mm internal ducting components are made from flame retardant materials.
Notes that all wall outlets for ducting are UV stabilized.
Specifies maximum ducting lengths for wall and island hoods.
Explains the necessity of using the top section with vents for recirculation mode to avoid noise and vibration.
Requires charcoal filters for non-vented hoods and refers to filter fitting pages.
Instructions for unpacking and checking for cosmetic damage before installation.
Verifies that all necessary parts and fixings are included in the packaging.
Advises against removing protective film until after installation to prevent damage.
Recommends removing and storing grease filters safely until installation is complete.
Mandates the use of either a ducting kit or charcoal filters for all Luxair hoods.
Informs users where to purchase filters and ducting kits.
Identifies the numbered parts of the STD/RND appliance shown in the diagram.
Explains how to operate the fan speed and turn the unit on/off using control buttons.
Guides on positioning the hood body above the hob, adhering to height regulations.
Instructions for securely mounting the main hood body to the wall, considering fixings.
Details how to measure and mark for chimney section bracket installation.
Instructions for marking and drilling the ducting hole, including minimum distance from the hood.
Guides on marking and positioning the fused spur socket for electrical connection.
Instructs on remounting the hood and making electrical/ducting connections following safety guidelines.
Details the assembly of chimney sections after electrical and ducting connections are made.
Guides on sliding and securing the top chimney section to the wall bracket.
Instructions for fitting charcoal filters for non-vented hoods.
Describes the nature and cleaning of metal grease filters.
Final step to remove protective film from the new hood.
Step-by-step guide to fitting charcoal filters for CVD-ST models.
Continues fitting instructions for glass units, focusing on glass placement.
Instructions for fitting the telescopic chimney sections after the glass is installed.
Explains the function of various electronic switches and buttons on the hood.
Emphasizes that island hood installation requires at least two people for safety and proper handling.
Details positioning the ceiling mount for island hoods and marking fixing points.
Specifies requirements for ceiling fixings, hole drilling, and ducting connection for island hoods.
Guides on passing ducting and cables through the ceiling mount and securing it.
Crucial warning against inset mounting of island hood chimneys into ceiling voids.
Instructions for assembling and securing the glass component on island hoods.
Details inserting and connecting the top chimney section to the bottom section carefully.
Guides on lifting and positioning the assembled hood unit onto the ceiling mount.
Instructs on securing the flue sections at the correct height above the hob.
Finalizes ducting and electrical connections, including testing.
Guides on lifting and securing the outer stainless steel section of the island hood.
Instructions for replacing halogen bulbs in ball light fittings.
Detailed steps for removing and replacing halogen bulbs in ball lights.
Instructions for replacing bulbs in surface light fittings.
Details how to replace screw bulbs in light fittings.
Addresses common calls related to vibration and noise, suggesting checks.
Advises checking the ducting hose connection to the plastic collar for proper fitment.
Suggests disconnecting ducting to isolate vibration and noise causes.
Guides on testing vibration/noise after disconnecting ducting and contacting installer if issue persists.
Recommends checking motor housing inner flaps for obstructions if vibration continues.
Confirms correct installation of the top chimney with vent section for non-ducted hoods.
Mandates the use of charcoal filters for all non-vented hoods.
Identifies excessive ducting length as a cause for poor extraction.
Explains how vertical lift in ducting can affect vibration and air flow.
Highlights that too many bends in ducting reduce extraction rates.
Mentions standard motor power and optional higher power motors for improved extraction.
Provides a paper test method to check extraction performance.
Warns against using ducting smaller than 125mm, which can cause extraction and vibration issues.
Basic instruction for operating the remote control.
Explains how to control the hood lights using the remote.
Details operating the motor and fan speeds using the remote control buttons.
Warns about potential interference with microwave activity in certain areas.
Provides general notes on cleaning, susceptibility to scratches, and proper cleaning agents.
Offers specific cleaning advice for stainless steel surfaces, including recommended agents.
Advises on cleaning controls to prevent discoloration and damage.
Detailed instructions for cleaning grease filters by hand using mild solutions.
Instructions for cleaning grease filters in a dishwasher, including program and detergent recommendations.
Provides important electrical supply information specific to UK, IRL, NZ, ZA, and AUS regions.
Details extraction power and performance data for wall-mounted hoods.
Details extraction power and performance data for island hoods.
Provides noise level (decibel) ratings for wall-mounted hoods at different speeds.
To Next Page
