Luxaire ACCLIMATE AL6B036F3

To Next Page

TECHNICAL GUIDE

ACCLIMATE

SPLIT-SYSTEM AIR CONDITIONERS

16 SEER – R-410A

MODELS:

AL6B024 THRU 060

(2 THRU 5 NOMINAL TONS)

Due to continuous product improvement,

specifications are subject to change without notice.

Visit us on the web at

www.upgnet.com and www.luxaire.com

Additional rating information can be found at

www.ahridirectory.org

WARRANTY

Standard 5-year limited parts warranty.

10-year limited compressor warranty.

Premium System Warranty - Limited lifetime compressor

when matched with an approved Johnson Controls Unitary

Products premium furnace and coil or premium air handler.

Extended 10-year limited parts warranty when product is

registered online within 90 days of purchase for replace-

ment or closing for new home construction.

LISTED

567177-LTG-D-1211

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

DESCRIPTION

The 16 SEER Series unit is the outdoor part of a versatile cli-

mate system. It is designed with a matching indoor coil compo-

nent from Johnson Controls Unitary Products. Available for

typical applications, this climate system is supported with

accessories and documents to serve specific functions.

FEATURES

• Superior Coil Protection – A decorative, stamped metal coil

guard completely protects coil from debris and other large

damaging material.

• Isolated Compressor Compartment – A molded composite

bulkhead isolates the compressor from the rest of the unit,

reducing sound and vibration.

• Protected Compressors – Each compressor is protected

against abnormal pressures by an internal pressure relief

valve and factory installed high and low pressure controls.

Additional protection against moisture and debris is provided

by factory installed liquid line filter driers.

• Environmentally Friendly Refrigerant – Next generation

refrigerant R-410A delivers environmentally friendly perfor-

mance with zero ozone depletion.

• Durable Finish – Automotive quality finish provides the ulti-

mate protection from harmful U.V. rays and rust creep,

ensuring long-lasting, high quality appearance. A powder-

paint topcoat is applied over a baked-on primer, using a gal-

vanized, zinc coated steel base material. The result is a fin-

ish that has been proven in testing to provide 33% greater

durability than conventional powder-coat finishes.

• Lower Installed Cost – Designed to provide enhanced

installability by featuring a slide-down control compartment

and angled service valves to reduce overall installation time

and cost.

• Low Operating Sound Levels – A fan design boasting tech-

nology adapted from aeronautic and defense engineering

provides for whisper quiet operation by allowing airflow to

flow smoothly and efficiently across the fan tips.

• Filter-Drier – A factory installed, solid core liquid line filter-

drier filters harmful debris and moisture from the system.

• Easy Service Access – A full end, full service, access panel

with handle makes for easy entry to internal components.

• Composite Base - Strong and durable composite base pan

resists rust and corrosion while it helps reduce vibrations and

noise.

• SilentDrive

System - Features combination of swept-

wing fan, composite base pan, isolated compressor compart-

ment, and single-stage compressor to reduce overall sound

to a mere whisper.

• Low RPM fan motor - Helps to reduce airflow noise.

• Communications Capable – Requiring only a simple 4-wire

installation, the communicating capability enables the use of

the Touch Screen Communicating Control, allowing real time

visibility of system operation and the use of diagnostic fea-

tures, while still maintaining the ability to function with a tradi-

tional thermostat.

• Agency Listed - U.L. and C.U.L. listed - approved for out-

door application. The unit is certified in accordance with the

Unitary Small Equipment certification program, which is

based on AHRI Standard 210/240.

Need help?

Do you have a question about the Luxaire ACCLIMATE AL6B036F3 and is the answer not in the manual?

Summary

Technical Guide

Product Description

Overview of the 16 SEER Series outdoor unit and its system compatibility.

Key Features

Highlights of the unit's design, technology, and performance enhancements.

Warranty Information

Details on standard, premium, and extended limited warranties for the product.

Physical and Electrical Data

Unit Specifications Table

Detailed table of physical dimensions, electrical ratings, and component specifications for various models.

Unit Dimensions Diagram

Diagram showing the physical dimensions of the outdoor unit models.

System Charge and Installation Procedures

System Charge for Matched Systems

Table detailing system charge (refrigerant) for various outdoor unit and indoor coil combinations.

Installation Procedures

Step-by-step instructions for verifying system charge, TXV, and line set requirements.

Cooling Capacity with Air Handler Coils

Capacity Data Table

Table listing cooling capacity, SEER, EER, and other performance metrics for various air handler coil combinations.

Cooling Capacity with Air Handler Coils (Continued)

Capacity Data Table (Continued)

Continued table of cooling capacity, SEER, EER, and performance metrics for air handler coil matches.

Cooling Capacity with Air Handler Coils (Continued)

Capacity Data Table (Continued)

Further continuation of cooling capacity data for air handler coil combinations, including SEER and EER.

Cooling Capacity with Furnaces and Coils

Capacity Data Table (Furnace;Coil Matches)

Table showing cooling capacity, SEER, EER for various furnace and coil system combinations.

Cooling Capacity with High Efficiency Motor Furnaces

Capacity Data Table (High Efficiency Furnaces)

Table detailing cooling capacity, SEER, EER for systems using high efficiency motor furnaces.

Cooling Capacity with High Efficiency Motor Furnaces (Continued)

Capacity Data Table (High Efficiency Furnaces - Continued)

Continued table of cooling capacity, SEER, EER for high efficiency motor furnace systems.

Cooling Capacity with High Efficiency Motor Furnaces (Continued)

Capacity Data Table (High Efficiency Furnaces - Continued)

Further continuation of cooling capacity data for high efficiency motor furnace combinations.

Cooling Capacity with High Efficiency Motor Furnaces (Continued)

Capacity Data Table (High Efficiency Furnaces - Continued)

Additional cooling capacity data for high efficiency motor furnace systems, including SEER and EER.

Cooling Capacity with High Efficiency Motor Furnaces (Continued)

Capacity Data Table (High Efficiency Furnaces - Continued)

More cooling capacity data for high efficiency motor furnace systems, covering various coil and outdoor unit models.

Cooling Capacity with High Efficiency Motor Furnaces (Continued)

Capacity Data Table (High Efficiency Furnaces - Continued)

Final section of cooling capacity data for high efficiency motor furnace systems, detailing performance metrics.

Cooling Capacity with High Efficiency Motor Furnaces (Continued)

Capacity Data Table (High Efficiency Furnaces - Continued)

Additional cooling capacity data for high efficiency motor furnace systems, including SEER and EER.

Accessories and Installation

Available Accessories

List of optional accessories like Hard Start Kits, TXV Kits, and Low Ambient Switches.

Sound Power Levels

Octave band spectrum data for sound power levels across different cooling modes and sizes.

Typical Installation Diagram

Diagram illustrating recommended clearances and wiring for outdoor unit installation.

Cooling Performance Data

Performance Data Table (Air Handler;Furnace Multipliers)

Table providing multipliers to adjust cooling performance based on specific indoor coil or furnace matches.

Cooling Performance Data (Continued)

Performance Data Table (Continued)

Continued cooling performance data, including Total Capacity, Sensible Capacity, and KW for various system configurations.

Cooling Performance Data (Continued)

Performance Data Table (Furnace;Coil Multipliers)

Table of cooling performance multipliers for furnace and coil combinations.

Cooling Performance Data (Continued)

Performance Data Table (Continued)

Further cooling performance data, detailing Total Capacity, Sensible Capacity, and KW for different system types.

Cooling Performance Data (Continued)

Performance Data Table (Continued)

Additional cooling performance data and multipliers for furnace and coil configurations.

Cooling Performance Data (Continued)

Performance Data Table (Continued)

Cooling performance data for various outdoor and indoor unit combinations, including SEER and EER.

Cooling Performance Data (Continued)

Performance Data Table (Continued)

Continued cooling performance data, focusing on furnace and coil multipliers for various models.

Cooling Performance Data (Continued)

Performance Data Table (Continued)

Cooling performance data table for different outdoor and indoor unit combinations, including SEER and EER.

Cooling Performance Data (Continued)

Performance Data Table (Continued)

Final cooling performance data table, detailing multipliers for furnace and coil matches.

Cooling Performance Data (Continued)

Performance Data Table (Continued)

Cooling performance data for various outdoor and indoor unit combinations, including SEER and EER.