What to do if my Luxman Receiver display lights up but there is no sound?
If your Luxman Receiver's display lights up but there's no sound or picture, check these potential causes: * Ensure all input and speaker connections are securely connected. * Verify that the mute function is not activated by pressing the Mute button. * Increase the volume level using the volume control.
How to fix a Luxman Receiver that is not responding to remote commands?
If your Luxman Receiver isn't responding to the remote, the issue might be: * Weak batteries: Try changing the remote batteries. * Incorrect device selection: Press the FUNCTION buttons on the remote. * Obstructed sensor: Ensure the front-panel sensor on the receiver is visible to the remote, or connect the remote sensor.
Why is there no sound from my Luxman Receiver and the power light is red?
If you're getting no sound from any speaker and the light around the power switch on your Luxman Receiver is red, it indicates the amplifier is in protection mode. This could be due to: * A short circuit: Check the speaker wire connections for shorts at both the receiver and speaker ends. * Internal problems: Contact your local LUXMAN service center.
How to troubleshoot a Luxman Receiver that won't turn on?
If your Luxman Receiver doesn't function when you push the main power switch, the problem could be: * No AC power: Make sure the AC power cord is plugged into a live outlet. * Outlet issue: Check if the outlet is switch-controlled.
Why are my surround speakers not working on my Luxman 7.1 Channel Reciever LR-7500 Receiver?
If you're not getting sound from the surround or center speakers on your Luxman Receiver, consider the following: * Incorrect surround mode: Select a mode other than Stereo. * Monaural input: There is no surround information from mono sources. * Incorrect configuration: Check the speaker mode configuration. * Stereo or Mono program material: The surround decoder may not create center- or rear-channel information from nonencoded programs.
What to do if letters flash and digital audio stops on my Luxman 7.1 Channel Reciever LR-7500 Receiver?
If letters flash in the channel indicator display and digital audio stops on your Luxman Receiver, it could be due to: * Paused digital audio feed: Resume play for DVD. * Incorrect input selection: Check that Digital Input is selected.
Why is my Luxman 7.1 Channel Reciever LR-7500 tuner buzzing intermittently?
If you're experiencing intermittent buzzing in the tuner of your Luxman Receiver, it might be due to local interference. Try moving the unit or antenna away from computers, fluorescent lights, motors, or other electrical appliances.
Guidelines for positioning front, center, surround, and subwoofer speakers for optimal sound.
Guide to using digital inputs/outputs for PCM, Dolby Digital, and DTS signals.
Explanation of composite, S-Video, and component video connections.
Details the functions of buttons on the remote control unit.
Configuring speaker sizes (large/small) and types for optimal surround sound.
Adjusting crossover points for different speaker groups.
Using test tone to adjust relative volume between speakers.
Inputting speaker distances for timing compensation and A/V sync.
Overview of OSD menu for adjusting system settings.
Lists the main categories for system configuration: Function, Surround, Speaker, Distance, etc.
Detailed explanation of Dolby Digital, Dolby Digital EX, DTS, Pro Logic II, Neo:6, and Virtual Speaker modes.
Configuring speaker sizes, types (Surround, Surround Back, Subwoofer).
Adjusting crossover points for speakers (40Hz-200Hz).
Adjusting speaker distances and channel levels for optimal sound.
Methods for programming the remote to control other devices.
List of brands and corresponding codes for VCR remote programming.
List of satellite receiver brands and codes for remote control.
List of TV brands and corresponding codes for remote programming.
Solutions for unit not powering on or displaying lights without sound/picture.
Troubleshooting sound problems, surround/center speaker issues.
Solutions for remote command issues and buzzing interference.
Power output, input sensitivity, and surround system separation specifications.
Specifications for digital audio processing and FM/AM tuners.
Video specifications, power requirements, dimensions, weight, and accessories.
To Next Page
General