5
Features of This Unit
Digital input terminals
This unit is equipped with a coaxial input terminal and two
optical input terminals. It is compatible with S/PDIF formated
signals between 44.1 kHz and 192 kHz.
Low jitter digital inputs (S/PDIF) have been achieved by using
a Burr-Brown PCM9211 PLL chip.
Digital audio signals from other audio devices are played back
with significantly improved audio quality.
DD converter function
Signals encoded at 192 kHz/24 bit or less, including USB
input, are digitally reproduced over S/PDIF.
Last memory function
Built-in flash memory can memorize settings such as digital
input, Super Audio CD/CD, digital filter, etc.
Dimmer function
The display brightness can be adjusted with 4 brightness levels.
Digital output OFF
The digital audio output can be deactivated to improve the
quality of the analog audio output.
Analog output terminals
The RCA output terminal are made of copper alloy and XLR
terminal manufactured by Neutrik.
Analog output phase switching
Both balanced output and unbalanced output are phase
switchable.
Original technologies
Our traditional, non-angled circuitry, OFC internal wiring, and
original custom-made components are used throughout the
unit.
To Next Page
Loading...
Need help?
General
