With the D-N150 and D-03X, the transmission mode can
be switched between Isochronous and Bulk Pet.
Set the transmission mode and pattern in the "LUXMAN
Audio Driver Control Panel", accessible from the Windows
"Control Panel".
The default setting after driver installation is "Isochronous".
Also, several data transmission patterns are available for
Bulk Pet.
For details on Bulk Pet transmission, refer to the URL
below:
https://www.itf.co.jp/prod/audio_solution/bulk-pet/bulk-pet-en
Transmission Mode Setting <for Windows>
To Next Page
Loading...
General