Luxman DZ-112 Service Manual

DZ-112
Disassembly Instructions
Disc Tray
1. Removal of CD Mechanism
(1) After removal of the top cover, open the disc tray.
(2) Remove the panel tray in the arrow direction as
shown in Figure 1.
(3) Remove three screws marked ” ©” as shown in
Figure 2.
(4) Disconnect all wires from the CD Mechanism.
Panel Tray
Figure 1
Main P. C. Board
CD Mechanism P. C. Board Support (2¥ 1)
Figure 2
2. Removal of Front Panel and Logic//Fader/
Phone P. C. Board
= Front Panel
(1)
After
removal
of
Front
Panel,
remove
six
screws
Hooks
marked
"<”
as
shown
in
Figure
3.
(2) Remove six hooks as shown in Figure 3.
(3) Disconnect a connector from the Logic P. C, Board.
Hacks Figure 3
3. Removal of Main P. C. Board
(1) After removal of the top cover, remove three
screws
marked
“A”
as
shown
in
Figure
5.
-
Oa
:
F
ot
A
(2)
Remove
four
P.
C.
Board
supports
(X1)
from
Main
7,
N
ee
F
Push
P.
C.
Board
\
P.
C.
Board
as
shown
in
Figure
2,
by
pushing
the
/
4
;
ann
ane
SupportGX
1)
\Q
point
“A”
as
shown
in
Figure
4.
/
’
(3) Disconnect all connectors from Main P. C. Board.
Bottom /
a Chassis
Cover Rear \N
Main /
P. C. Board
a”
Figure 4
Figure 5

Luxman DZ-112 Specifications

General

Brand	Luxman
Model	DZ-112
Category	CD Player
Language	English