Luxor STANDUP-CF60 User Manual

Important notice advising not to fully tighten screws until assembly is complete.

Lists the essential tools required for assembling the desk, e.g., mallet.

Assembles the primary leg frames using casters and specific parts.

Positions the central mechanism connecting the leg frames.

Secures the crank adjustment housing using bolts.

Installs cross bars for structural support, ensuring correct orientation.

Turns the desk over and attaches the manual crank.

Secures the hex rod mechanism with locking bolts.

Mounts the desktop to the assembled frame using screws.

Completes the assembly by tightening all fasteners and adding covers.