To Next PageTo Next Page
Need help?Do you have a question about the Luxul XAP-1040 and is the answer not in the manual?
General| Wireless Standards | 802.11a/b/g/n/ac |
|---|---|
| Frequency Bands | 2.4 GHz and 5 GHz |
| Antenna Type | Internal |
| Antenna Gain | 2.4GHz: 3dBi, 5GHz: 4dBi |
| Ports | 1 x 10/100/1000Base-T Ethernet |
| Power over Ethernet (PoE) | 802.3af PoE |
| Mounting Options | Ceiling, Wall |
| Dimensions | 160mm (diameter) x 37mm (height) (6.3" x 1.46") |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Security | WPA, WPA2 |
| SSIDs | Up to 8 |
Safety warnings for installation and operation.
Consult site survey for equipment placement and power needs.
Lists necessary devices and software for setup.
Details all items included in the XAP-1040 package.
Essential safety instructions for users and property.
Describes the front panel features and orientation indicators.
Details mounting options and hardware on the rear of the device.
Explains the RJ-45 connection port for power and data.
Locates internal LEDs and the reset button for service.
Specifies operating temperature, humidity, and environmental considerations.
Provides instructions on how to physically install the access point.
Process for accessing the device's web management interface.
Guides through initial network setup for optimal configuration.
Covers basic and advanced wireless network settings.
Configures the device for point-to-point or point-to-multipoint wireless bridging.
Manages administrator password, firmware, and device settings.
Explains Quality of Service settings for traffic prioritization.
Displays current configuration and operational status of the AP.
Provides advice on safe usage of wireless devices.
Details standards for human exposure to radio frequency radiation.
Outlines FCC requirements for digital device interference.
States compliance with FCC Part 15 rules.
States compliance with Industry Canada standards.
