Need help?Do you have a question about the Luxury Spas Elite Series and is the answer not in the manual?
Details hyperthermia risks, symptoms like hazard unawareness, fetal damage, and drowning.
Discusses permits for exterior construction, electrical circuits, and residential barriers.
Details requirements for a solid, level foundation to support spa weight and prevent damage.
Considers placement for accessibility, climate, privacy, view, and service access.
How intended use (recreational/therapeutic) influences spa positioning and surrounding space.
Advice on placing the spa considering weather, privacy, and neighbor views.
Tips for maintaining a clean spa area, including using mats for foot cleaning.
Ensures minimum 18-inch access for service when placing the spa near structures.
Explains the 3-wire power connection (LI, L2, Ground) for Luxury Spa Hot Tubs.
Details dedicated GFCI circuits, wire types (copper), gauge, and junction box rules.
Step-by-step instructions to test the GFCI breaker's functionality before use.
Identifies the designated entry port for the spa's power supply.
Importance of testing and adjusting chemical balance for water quality and equipment.
Explains TA, its role as a pH buffer, and recommended levels (80-120 ppm).
Defines CH, its importance in preventing corrosion, and recommended levels (150-200 ppm).
Details ozone as a natural purifier, its role in sanitization, and maintenance needs.
Discusses choosing sanitizers (chlorine/bromine) and general chlorine sanitation guidelines.
Instructions for using chlorine, including avoiding specific types and proper shock procedures.
Explains bromine's effectiveness, low odor, and ability to break down impurities.
Guidance on shocking water with oxidizer shock to remove contaminants and improve sanitizer effectiveness.
Explains the importance of filter cleaning for clear water and efficient heating/pump operation.
Details weekly cleaning and periodic deep cleaning of the filter for optimal performance.
Information on the ozonator's function, its role in sanitization, and replacement recommendations.
Provides a schedule for spa maintenance tasks, from daily to every two years.
Instructions for removing, cleaning, and reinstalling spa pillows for maintenance.
Steps for cleaning the acrylic spa shell with a low-detergent, non-abrasive cleaner.
Crucial safety guidelines for handling, mixing, storing, and using spa chemicals.
Default mode for occupied use, displays 'N' on LCD.
Power-saving mode for unoccupied use, displays 'E' on LCD.
Anti-freeze protection mode, displays 'D' on LCD.
Details functionality of keypad buttons, starting with Water Pump 1.
Controls for the second water pump, including on/off and speed adjustments.
Controls for the third water pump, including on/off and speed adjustments.
Operation of the air bubble system, including on/off and auto shut-off.
Controls for the underwater lamp, including on/off and color changing modes.
How to program up to two daily time periods for water circulation.
Explains the ozone system's role in sanitizing water and its automatic operation.
Tips for preheating the spa to save energy, especially in colder months.
Instructions for programming two daily time periods for spa pre-heating.
Details the spa's automatic anti-freeze protection based on water temperature.
Procedure to switch temperature display between Celsius and Fahrenheit.
How to adjust the spa's temperature using the up and down buttons.
Ensures correct operation of other functions by setting the spa's clock accurately.
Covers structural failure and acrylic surface defects for 10 and 5 years respectively.
Warrants pumps, heater, and control system against defects for 2 years (parts only).
Covers other components like LED lights, fuses, and jets for 2 years (parts only).
Warrants the spa cover against defects in material for 30 days from delivery.
Details warranty application, limitations, and requirements for service.
Customer reporting of faults within 10 business days and technician visit process.
Warranties for spa cover, steps, lights, headrests, skirt, and filter (30 days), and other components (1 year).
Conditions that void the warranty, including neglect, misuse, and commercial use.
Limits liability for damages and specifies warranty coverage duration.
General| Category | Hot Tub |
|---|---|
| Water Capacity | 400 gallons |
| Shell Material | Acrylic |
| Insulation | Full Foam |
| Lighting | LED Multi-Color |
| Audio System | Bluetooth Enabled |
To Next Page
