To Next PageTo Next Page
Need help?Do you have a question about the Lyman Xpress and is the answer not in the manual?
Introduction to the Lyman Case Prep Xpress, highlighting its features and included accessories.
Instructions for unpacking the Case Prep Xpress and verifying all included accessories are present.
Safety precautions and first aid for handling Motor Mica Case Lube, including ventilation and eye protection.
Tool for quickly removing fouling from primer pocket bottoms with light pressure.
Brushes for cleaning case necks, available for .25, .30, .38, and .45 caliber cases.
Dry lubricant for easing resizing die expander ball passage; applied by dipping case neck.
Guidelines for maintaining the Case Prep Xpress, including cleaning and care instructions.
Important advice before use, including reading the manual and contacting support if needed.
Instructions on how to install case prep tools into the unit's stations.
Tool to chamfer case mouths at 22 degrees for easier bullet entry, works on 17-45 cal.
Tool to remove excess brass from trimmed case mouths, leaving a smooth finish, works on 17-45 cal.
Tool to cut rifle primer pockets to uniform depth for consistent ignition and accuracy.
Tool to remove military crimps and rough edges from primer pockets.
General