18
ENGLISH
10. Tether cut-out switch
It shuts off engine preventing snowmobile to runaway if the operator falls off the
vehicle accidently.
Operation
Attach to clothing eyelet than snap tether cord cap over post before starting
engine.
1. Snap over post
2. Attach to eyelet
If emergency engine shut off is required, completely pull tether cord cap from
post.
Typical
Some Liquid-Cooled Models
On these models tether cut-out switch is part of tether cut-out system. This
system serves 3 functions. It shuts off engine preventing snowmobile to runaway
if the operator falls off the vehicle accidently.
Through the D.E.S.S.
TM
(Digitally Encoded Security System), it acts as a lock by
preventing unauthorized use of your snowmobile thus deterring theft.
Finally, it prevents unintentional electric starter operation in vehicles so equipped
by disabling the electric starter and ignition circuits in the MPEM or ECU.
DESS (Digitally Encoded Security System) Description
This system is digitally encoded to provide you and your snowmobile with the
equivalent security as a conventional lock key.
The tether cord cap provided with your snowmobile contains an electronic chip in
which a unique digital code is permanently memorized. You authorized Lynx
To Next Page
Loading...
Need help?
General
