13
Thermostat Objects Supported
Please note that the wireless all objects related to any specific thermostat exchange present value to and from
the JENE on a fixed COV subscription base.
Back and forth from the JENE to the wireless thermostats, the COV values are fixed to:
• 2.5% for PI demand Numeric objects
• 0.5 for all temperature ( C & F ) and humidity Numeric objects
• On change for all Enum’s & Boolean’s
A single JENE can support a “recommended” maximum of 30 thermostats. The total number of thermostat
supported is dependent on the resources available for the WirelessStatNetwork” driver Jar file and the extent of
integration added to the JENE station itself. It is safe to assume that if more advanced functions and services
added to the station, the available resources for the driver will be less. It is important that once the station is all
done and installed with all GUI, services, trends, logs, etc…that resources are monitored and not above what is
recommended by Lynxspring for each specific type of JENE controller.
The list of points available for each thermostat model is different and has been optimized to best suit typical
applications used by every single typical thermostat model available.
It is important to mention that versus the wired BACnet MS-TP or LON models, which offer ALL possible objects
supported by the thermostats (user, status and configuration objects ), the wireless versions only support the
points, which are of relevance for typical BAS interaction. As such most configuration properties of the
thermostats are not available through the JENE and need to be changed locally at the thermostat.
Versus other wired drivers offered with the Niagara AX
®
environment, the object list supported by each model of
wireless thermostat is not editable and cannot be changed.
To Next Page
Loading...
Need help?
General
