Lyons Contour DCT5758-CL Series - User Manual

Right Hand Install Left Hand Install
Contour™ Sliding Door (DCT5758-CL-xx)
DO NOT RETURN PRODUCT!
FOR QUESTIONS OR CONCERNS
please call or e-mail our customer support team
8:00am-4:30pm EST Monday - Friday
1-800-458-9036
lyonssupport@lyonsindustries.com
TOOLS YOU WILL NEED:
Power Drill
Level
Pencil
Tape Measure
SUPPLIES YOU WILL NEED:
1/8” Drill Bit
1/4” Masonry Drill Bit (For Tile Install Only)
Silicone Caulk
IMPORTANT
• Read installation instructions carefully before starting project.
• Keep instructions for warranty information.
•
Familiarize yourself with all parts as shown on the next page.
WARNING: Safety glasses should always be worn when installing tempered glass.
(color code replaces “xx” in SKU)
Outside View Outside View
Screw Driver
Rubber Mallet
Safety Glasses
Caulk Gun
The exploded view will provide a helpful reference related to the location of the parts
and how they are mounted.
•

Summary

Part List

Left Hand Assembly Installation

Step 1: Tracks and Side Post

Install top/bottom tracks with side post and magnet jamb using 1" screws; slide wall jamb over.

Step 2: Frame Placement and Leveling

Place door frame, level it, and mark drill locations for wall mounting.

Step 3: Drilling and Anchors

Drill holes based on enclosure type (1/8" for acrylic, 1/4" for tile) and insert anchors if needed.

Step 4: Wall Jamb Attachment

Attach wall jambs to the wall using 2-3/4" screws into drilled holes/studs.

Step 5: Bumpers and Side Panel

Apply bumpers to tracks and slide glass panel into the side post.

Step 6: Fixed Panel and Wedge

Fasten fixed panel with fixing block and insert vinyl wedge between glass and jamb.

Step 7: Magnet Strip

Slide magnet strip into magnet jamb.

Step 8: Rollers and Seals

Attach rollers to door glass; install magnet strip and vinyl seal on door sides.

Step 9: Hanging and Securing Door

Hang door on track, secure bottom rollers, and install setting block with screw.

Step 10 & Final: Caulking

Caulk the outside and inside of the door frame; allow 24 hours to dry.

Right Hand Assembly Installation

Step 1: Tracks and Side Post

Install top/bottom tracks with side post and magnet jamb using 1" screws; slide wall jamb over.

Step 2: Frame Placement and Leveling

Place door frame, level it, and mark drill locations for wall mounting.

Step 3: Drilling and Anchors

Drill holes based on enclosure type (1/8" for acrylic, 1/4" for tile) and insert anchors if needed.

Step 4: Wall Jamb Attachment

Attach wall jambs to the wall using 2-3/4" screws into drilled holes/studs.

Step 5: Bumpers and Side Panel

Apply bumpers to tracks and slide glass panel into the side post.

Step 6: Fixed Panel and Wedge

Fasten fixed panel with fixing block and insert vinyl wedge between glass and jamb.

Step 7: Magnet Strip

Slide magnet strip into magnet jamb.

Step 8: Rollers and Seals

Attach rollers to door glass; install magnet strip and vinyl seal on door sides.

Step 9: Hanging and Securing Door

Hang door on track, secure bottom rollers, and install setting block with screw.

Step 10 & Final: Caulking

Caulk the outside and inside of the door frame; allow 24 hours to dry.

Lyons Shower Door Limited Warranty

Remedies

Details purchaser's remedy for defects: repair, replacement, or refund.

Warranty Limitations

Specifies limitations on implied warranties like merchantability and fitness for purpose.

Lyons Contour DCT5758-CL Series Specifications

General

Material	Ceramic
Shape	Elongated
Color	White
Bowl Shape	Elongated
Water Consumption	1.28 gpf
Seat Included	Yes
Type	Two-Piece
Flush Type	Gravity
Rough-In Size	12 inches