Lyons NanoVNA - Page 29

08/09/2020 NanoVNA User Guide | NanoVNA User Guide
https://cho45.github.io/NanoVNA-manual/#7- トレース 状 態 29/51
CAL SAVE SAVE n You can save the current settings by selecting.
CAL RESET You can reset the current calibration data by selecting. If you RESET want to recalibrate, you must do.
CAL CORRECTION Indicates whether error correction is currently being performed. You can select this to temporarily stop error
correction.
RECALL RECALL n You can recall the saved settings by selecting.
Equipment settings