Need help?Do you have a question about the M/A-Com JAGUAR 725M and is the answer not in the manual?
Procedures for routing all cables before radio mounting.
Instructions for connecting the power cable to the vehicle battery.
Details on the front mount extended option accessory cable.
How to connect the ignition sense lead for power control.
Connecting the control unit to the radio transceiver in remote setups.
Mounting the control unit using the provided bracket and hardware.
Mounting instructions for the speaker unit for optimal audio output.
Mounting the microphone hanger or hookswitch for convenient operator access.
Installing and configuring the Siren & Light Kit with the radio.
Steps for physically mounting the radio unit and making final connections.
Instructions for front mounting the radio using a specific bracket.
Instructions for mounting the radio unit in a remote configuration.
Programming the radio for dual control in front mount configuration.
Programming the radio for dual control in remote mount configuration.
Step-by-step guide for installing front mount dual control units.
Step-by-step guide for installing remote mount dual control units.
Field programming steps for dual control units in front mount setup.
Field programming steps for dual control units in remote mount setup.
Programming procedure for dual radio configurations before installation.
Instructions for installing dual radio units in front/remote configurations.
Guidelines for mounting mobile antennas for optimal signal reception.
Brief mention of base station antenna installation.
To Next Page
General