DISASSEMBLY PROCEDURES
1.
DISASSEMBLE THE BOTTOM PANEL AND BACK PANEL.
(A) REMOVE 4 PCS SCREW FROM THE BOTTOM PANEL.
(B) REMOVE 3 PCS SCREW FROM THE BACK PANEL.
(C) REMOVE 2 PCS NUT FROM THE BACK PANEL.
(Fig1)
2.
DISASSEMBLE THE MAIN PCB ASS’Y.
(A)REMOVE 3 PCS SCREW FROM THE MAIN PCB ASS’Y.
(B)REMOVE 3 PCS PCB FIXED HOLDER FROM THE MAIN PCB ASS’Y.
(C)REMOVE 1 PC KNOB FROM THE MAIN PCB ASS’Y.
(Fig2)
To Next Page
Loading...